CNC bridge saws — simple, precise, flexible
The Donatoni D-Series is a range of six compact CNC bridge saws with 5 interpolated axes, built for kitchen and bathroom countertops, shower trays and building cladding in marble, granite and engineered stone — including block cutting and processing.
A single machine cuts, mills, drills and shapes without taking the piece off the bench. The six models differ in size, cutting depth and available options, so the machine can be matched to the factory.

Blade up to 625 mm · cutting depth 200 mm
Model page →
Blade up to 750 mm · cutting depth 250 mm

Blade up to 750 mm · cutting depth 260 mm

Blade up to 850 mm · cutting depth 310 mm
Model page →
Blade up to 1600 mm · cutting depth 635 mm

Blade up to 2000 mm · cutting depth 800 mm
Model page →| D625 | D725 | D725 Q | D825 Q | D1600 | D2000 | |
|---|---|---|---|---|---|---|
| Interpolated axes | 5 | 5 | 5 | 5 | 5 | 5 |
| Carriage travel (X axis), mm | 3800 | 3700 (3800*) | 3900 | 3800 | 4000 | 4000 |
| Bridge travel (Y axis), mm | 2780 | 2900 | 2950 | 2950 | 3500 | 3500 |
| Head travel (Z axis), mm | 450 | 550 | 600 | 800 | 1400 | 1400 |
| Slab support bench, mm | 3800×2000 | 3500×2000 (3800×2400*) | 3500×2000 (3800×2400*) | 3500×2000 (3800×2400*) | 3500×2000 | 3500×2000 |
| Blade diameter, min–max, mm | 350–625 | 350–750 | 350–750 | 350–850 | 750–1600 | 750–2000 |
| Max. cutting depth, mm | 200 | 250 | 260 | 310 | 635 | 800 |
| Blade motor power, kW | 13 | 17.6 | 17.7 | 22 | 35 | 46 |
| Total installed power, kW | 23 | 27 | 34 | 37 | 42 | 52 |
| Max. carriage speed (X), m/min | 40 | 40 | 45 | 45 | 37 | 37 |
| Max. bridge speed (Y), m/min | 30 | 30 | 45 | 45 | 37 | 37 |
| Total machine weight, kg | 4650 | 4350 | 4500 | 4800 | 11500 | 12000 |
* Optional. Data according to the manufacturer's catalogue; Donatoni may change specifications.
| D625 | D725 | D725 Q | D825 Q | D1600 | D2000 | |
|---|---|---|---|---|---|---|
| Oil-bath lubrication | — | — | ● | ● | — | — |
| Automatic grease lubrication | ● | ● | — | — | ● | ● |
| Blade presetting | ● | ○ | ○ | ○ | ○ | ○ |
| Slab thickness probe | ● | ○ | ○ | ○ | — | — |
| Monobloc frame | ○ | — | — | — | — | — |
| MOVE System (suction-cup piece handling) | — | ○ | ○ | ○ | — | — |
| Camera + Photoslab | ○ | ○ | ○ | ○ | ○ | ○ |
| Lower-Cut unit | — | ○ | ○ | ○ | — | — |
| TOOL+ spindle | ○ | ○ | ○ | ○ | — | — |
| Tool holder | — | ○ | ○ | ○ | — | — |
| Lathe | — | ○ | ○ | ○ | — | — |
| Handheld terminal | ○ | ○ | ○ | ○ | ○ | ○ |
| Steel walls | ○ | ○ | ○ | ○ | ○ | ○ |
● Standard ○ Optional — Not available
A 21″ touch screen. The operator programs in automatic mode or runs the machine manually.
A 7″ touch screen for moving the axes by hand, saving origin points, reading the machine coordinates and switching the laser on and off.
A vertical side electrospindle, 0–14,000 rpm, for small-diameter diamond tools: incremental cutting, blind or through-hole drilling, and combined work with the blade and the cutter.
A suction-cup system with 6 pick-up zones that can be switched off and a capacity of up to 600 kg. It moves the cut pieces without operator intervention. Available on the D725, D725 Q and D825 Q.
An industrial camera that detects the slab surface on the bench and passes it to Parametrix — faster programming and detection of slab defects.
Cuts a groove in the underside of kitchen countertops for reinforcing rods. Positioning and cutting run automatically from Parametrix (requires a longer Y axis).
An optional lathe for columns and other elements with a circular or complex section (requires a longer Y axis).
D625, D725, D1600 and D2000: automatic centralised grease lubrication. D725 Q and D825 Q: an oil bath, with minimal maintenance in prolonged use.
Longitudinal, transverse, curved, inclined (0–90°), oblique and elliptical cuts; block milling; milling; drilling; and shaping (with Isocam only).
Parametrix, the software developed by Donatoni, drives all cutting, drilling and milling, including nesting and job statistics. Isocam adds shaping files (straight and arc shapes, roughing and finishing). Options: Easy Match and Project Match for book-matched projects, EasyStone (CAD/CAM and 5-axis machining) and Scan CNC (laser shape detection).